Supplier Spotlight

Show Reviews

Automotive Testing Expo Europe 2017 Show Review

Click here to read

 

Automotive Testing Expo Europe 2016 Show Review

Click here to read

 

Automotive Testing Expo Europe 2015 Show Review

Click here to read

 

Automotive Testing Expo North America 2014 Show Review

Click here to read

 

Automotive Testing Expo India 2014 Show Review

Click here to read

 

Latest Video


Waymo unveils self-driving cars

LV

Waymo, which started as the Google self-driving car project in 2009, is ready for the next phase. Fully self-driving vehicles are currently being tested on public roads, without anyone in the driver’s seat.

Click here to watch the video


Xing Mobility tests 'Miss E'

LV

Watch the inaugural shakedown of Xing Mobility's LMD-000E electric prototype racer at the Penbay International Circuit in Ping-Tung, Taiwan back in 2015

Click here to watch the video


As vehicle developers and suppliers continue to advance their software programs, ATTI wants to know, has simulation software established itself as the single most vital piece of equipment during a development program?

Articles

« back to listing

Development of a new intercooler for Formula SAE

In a unique project, Swansea University Race Engineering worked closely with additive manufacturing expert Renishaw to redesign the intercooler of its race car

 

For the 2015 Formula SAE race, Swansea University Race Engineering worked closely with additive manufacturing expert Renishaw to redesign the intercooler of its race car.

The aim was to reduce the component’s weight and size, in order to increase the speed of the car. To achieve this, the team used a form of additive manufacturing, metal powder bed fusion.

This technique uses a powerful high precision laser to fuse fine metallic powders in order to form highly complex functional components. The design of the parts is optimized using 3D CAD and the components themselves can be built from a wide range of metal powders melted in a tightly controlled inert atmosphere, in layers with a thickness ranging from 20μm to 100μm.

Key requirements
The location of the intercooler is essential because the part requires flowing ambient air to cool the boost air into the engine. In a Formula Student race car, the intercooler is situated behind the driver, above the engine – an unsuitable position in terms of heat transfer.

The new high-performance heat exchanger needed to have excellent heat transfer and low pressure drop through the system. The wider range of geometries made available by additive manufacturing meant the team could experiment with more innovative designs that enabled better airflow. Although additive manufacturing has previously been used in Formula 1, the current project is unique due to the large scale and cross flow nature of a car intercooler.

Overcoming design challenges
The team’s objectives were to ensure a high density of boost air for the engine, while still maintaining a good mass flow rate of air. The intercooler also needed to be as light as possible.

“Design had a massive impact on the end product, even more so than the material, which is something we didn’t originally expect,” explained Dr Nicholas Lavery, director of the Materials Advanced Characterisation Centre (MACH1) at Swansea University.

“Although our students had to go back to the drawing board many times, they were very pleased with the end product. It’s also interesting when results are unexpected; it either means you’ve muddled up your calculations or you’re on to something good. Luckily, in this case, it was the latter.”

To identify the best alternative, students tested four intercooler core designs. The different iterations reflected the design principles and capabilities of different manufacturing methods. The first core design, used as a benchmark, was a conventionally manufactured aluminium alloy, AlSi10Mg core with a simple vertical design on the ambient side and a sine wave shape on the boost side.

The second core was designed from 316L stainless steel using metal powder bed fusion. The design was identical to the first one, but was used to test how the added surface roughness available with additive manufacturing impacted heat transfer and pressure drop.

The real benefit of additive manufacturing came when the students started experimenting with the design freedom of the technology. The third intercooler core had a lattice of three dimensional star shapes to form the mesh – a design only made possible by additive manufacturing machines. The mesh was generated using additive manufacturing software and although it took several iterations, the team knew that they were on to a winner.

The fourth and final core used the same three dimensional star lattice structure used in the mesh core, but also made the strut cross-section finer, which meant a higher surface area and density.

Although superior to casting, the surface finish was not as smooth as a manufactured surface. The tests found that the higher surface roughness of additively manufactured intercoolers outperformed conventional counterparts.

This counter intuitive result could be due to better air mixing, altered flow conditions or a combination of both.

Mastering material and software challenges
After the students had identified the most efficient design, they examined potential materials and originally tried titanium Ti6Al4V, a lighter alternative to stainless steel, but with lower thermal conductivity.

Renishaw then offered to manufacture the part using aluminum alloy AISi10Mg, a material considered ideal due to its high thermal conductivity and light weight. Renishaw used the students’ designs to manufacture the intercooler.

Handling the designs was one of the most complex aspects of the project, mostly due to their large size. However, it was the CAD functions that enabled the most efficient positioning of the lattices to allow maximum heat efficiency, thus increasing the capabilities of the intercooler.

January 23, 2017

 

Read Latest Issue
Read Latest Issue
RECEIVE THE
LATEST NEWS


Your email address:



Web Exclusives

SEAT uses HBM autonomous DAQ system

SEAT and Polytechnic University of Catalonia (BarcelonaTech) have jointly developed a unique data acquisition enabling more precise control over instrumented parts and the entire data acquisition process  
Click here to read more



Modern calculation management

The engineering department at Hitachi Construction Truck Manufacturing is taking steps to improve its rigid-frame hauling truck design through improving its analysis tools
Click here to read more



Traveling in a Volkswagen that is still to be developed

Volkswagen Group’s IT Virtual Engineering Lab has developed a virtual concept car using digital future technology
Click here to read more



The importance of software engineering

Tier 1 supplier GKN’s software and electronics manager, Michael Schomisch, discusses how software development is becoming increasingly important in vehicle testing
Click here to read more



Daimler reveals how the GLC F-Cell went from testing to production

With the Mercedes GLC F-Cell SUV unveiled at Frankfurt this week, Daimler has revealed the extensive testing process the first production plug-in hydrogen-powered car was put through
Click here to read more




Supplier Spotlight

Supplier SpotlightClick here for listings and information on leading suppliers covering all aspects of the automotive testing industry. Want to see your company included? Contact jason.sullivan@ukimediaevents.com for more details.

فروشگاه اینترنتی فروشگاه اینترنتی سیستم همکاری در فروش ماهواره آنلاین اندروید کانال تلگرام چت روم دانلود فیلم فروشگظ;ه اینترنتی

Submit your industry opinion

Industry BlogDo you have an opinion you'd like to share with the automotive testing community? Good or bad, we'd like to hear your views and opinions on the leading issues shaping the industry. Share your comments by sending up to 500 words to john.thornton@ukimediaevents.com

Advertising

Recruitment AdTo receive information on booking an advertising banner please email jason.sullivan@ukimediaevents.com